Thrislington Cubicles - Flow

Thrislington

The last word in elegance, all flow doors close to a completely flush finish with 42mm thick hydraulically closing doors and hand lipped rebates. Stainless steel fittings complete the system.

Our patented Hydraulic Closer ensures that all Flow doors will close or open beautifully, quietly and with a satisfying amount of resistance. 

 

Technical Details

Glass

Back painted glass.

Options: Low-Iron, Clear, Range of standard colours, RAL match on request.

Specification: Overall cubicle height up to 2700mm with an 8mm floor clearance.

Framework: Full anodised aluminium frame, with extruded headrail finished with matching finish. Lock locates into receiver integrated within the vertical fascia.

Door: 42mm finished thickness consisting of a 29mm ultra lightweight MDF core, faced in high pressure laminate, then rebated and hand-lipped, to accept 5mm low-iron back painted toughened glass to both faces. Concealed fixings within the door allow attachment to stainless steel pivots, suspended from aluminium headrail and located onto floor fixed pivot bracket. Door falls closed by means of a hydraulic door closer concealed within the aluminium headrail (the closer can also be factory set to fall open).

Fascia: 70mm finished thickness consisting of two 12mm moisture resistant MDF core panels sourced from sustainable forests, faced in high pressure laminate, then edged all round and attached to a central aluminium frame. Panel faces finished with 5mm low-iron back painted safety glass. Flush aluminium lock receiver fitted into frame.

Divider: 32mm finished thickness consisting of a 22mm moisture resistant chipboard core, faced in high pressure laminate and finished to top and bottom edges. Two adjacent 5mm low-iron back painted toughened glass panels, bonded to each face. Suspended 8mm from the floor using concealed fixings (alternatively, the divider can be located in a floor channel).

Fittings: Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Sacrificial hard nylon shear tip to the lock finger, which locates into flush receiver, integrated within the cubicle fascia. Complete with emergency release facility and buffer.  Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Divider connected to front fascia using unique magnetic invisible fixings (except glass). Stainless steel coat hook supplied as standard. Tested to 350,000 cycles

Wood Veneer

Real wood veneer backed with composite material to enable fabrication.

Options: Matt, Silk, Relief, Grained, Unfinished, Optional cross grain.

Specification: Overall cubicle height up to 2700mm with an 8mm floor clearance.

Framework: Full anodised aluminium frame, with extruded headrail finished with matching finish. Lock locates into receiver integrated within the vertical fascia.

Door: 42mm finished thickness consisting of a 40mm ultra lightweight MDF core, rebated first, hand-lipped and faced with wood veneer. Concealed fixings within the door allow attachment to stainless steel pivots, suspended from aluminium headrail and located onto floor fixed pivot bracket. Door falls closed by means of a hydraulic door closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open).

Fascia: 70mm finished thickness consisting of two 18mm moisture resistant MDF core panels sourced from sustainable sources, edged first, attached to a central aluminium frame and faced with wood veneer. Flush aluminium lock receiver fitted into frame.

Divider: 24mm finished thickness consisting of a 22mm moisture resistant chipboard core, edged top and bottom, then faced with wood veneer. Suspended 8mm from the floor using concealed fixings (alternatively, the divider can be located in a floor channel).

Fittings: Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Sacrificial hard nylon shear tip to the lock finger, which locates into flush receiver, integrated within the cubicle fascia. Complete with emergency release facility and buffer.  Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Divider connected to front fascia using unique magnetic invisible fixings (except glass). Stainless steel coat hook supplied as standard. Tested to 350,000 cycles.

Stainless Steel

Metallic sheet bonded to MDF core, edge dependent on material.

Options: Brushed stainless steel, Patterned stainless steel, Satin anodised aluminium, Powder coated aluminium.

Specification: Overall cubicle height up to 2700mm with an 8mm floor clearance.

Framework: Full anodised aluminium frame, with extruded headrail finished with matching finish. Lock locates into receiver integrated within the vertical fascia.

Door: 42mm finished thickness consisting of a 40mm composite core panel, rebated first, hand-lipped in matching high pressure laminate and faced with 1mm stainless steel sheet. Concealed fixings within the door allow attachment to stainless steel pivots, suspended from aluminium headrail and located onto floor fixed pivot bracket. Door falls closed by means of a hydraulic door closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open).

Fascia: 70mm finished thickness consisting of two 18mm moisture resistant MDF core panels sourced from sustainable forests. Flush aluminium lock receiver fitted into frame.

Divider: 24mm finished thickness consisting of a 22mm moisture resistant chipboard core, faced with 1mm stainless steel sheet, folded on top and bottom edges. Maximum depth of dividing panel, without a butt joint in the face material, is 1500mm. With a butt joint, the divider depth can be up to 1980mm. Suspended 8mm from the floor using concealed fixings (alternatively, the divider can be located in a floor channel).

Fittings: Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Sacrificial hard nylon shear tip to the lock finger, which locates into flush receiver, integrated within the cubicle fascia. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Divider connected to front fascia using unique magnetic invisible fixings. Stainless steel coat hook supplied as standard.

Aluminium

Metallic sheet bonded to MDF core, edge dependent on material.

Options: Brushed stainless steel, Patterned stainless steel, Satin anodised aluminium, Powder coated aluminium.

Specification: Overall cubicle height up to 2700mm with an 8mm floor clearance.

Framework: Full anodised aluminium frame, with extruded headrail finished with matching finish. Lock locates into receiver integrated within the vertical fascia.

Door: 43mm finished thickness consisting of a 40mm composite core panel, rebated first, hand-lipped in matching high pressure laminate and faced with 1.5mm stainless steel sheet. Concealed fixings within the door allow attachment to stainless steel pivots, suspended from aluminium headrail and located onto floor fixed pivot bracket. Door falls closed by means of a hydraulic door closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open).

Divider: 24mm finished thickness consisting of a 22mm moisture resistant chipboard core, faced with 1mm stainless steel sheet, folded on top and bottom edges. Maximum depth of dividing panel, without a butt joint in the face material, is 1500mm. With a butt joint, the divider depth can be up to 1980mm. Suspended 8mm from the floor using concealed fixings (alternatively, the divider can be located in a floor channel).

Fittings: Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Sacrificial hard nylon shear tip to the lock finger, which locates into flush receiver, integrated within the cubicle fascia. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Divider connected to front fascia using unique magnetic invisible fixings. Stainless steel coat hook supplied as standard.

High Pressure Laminate

Multiple layers of resinimpregnated high quality kraft papers.

Options: High Pressure Laminate, Extensive range of colours, Wide selection of suppliers, Colour match on request, Digital prints, Wood grains.

Specification: Overall cubicle height up to 2700mm with an 8mm floor clearance.

Framework: Full anodised aluminium frame, with extruded headrail finished with matching finish. Lock locates into receiver integrated within the vertical fascia.

Door: 42mm finished thickness consisting of a 40mm ultra lightweight MDF core, rebated first, hand-lipped and faced with high pressure laminate. Concealed fixings within the door allow attachment to stainless steel pivots, suspended from aluminium headrail and located onto floor fixed pivot bracket. Door falls closed by means of a hydraulic door closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open).

Fascia: 70mm finished thickness consisting of two 18mm moisture resistant MDF core panels sourced from sustainable forests, edged first, attached to a central aluminium frame and faced with high pressure laminate. Flush aluminium lock receiver fitted into frame.

Divider: 24mm finished thickness consisting of a 22mm moisture resistant chipboard core, edged top and bottom, then faced with high pressure laminate. Suspended 8mm from the floor using concealed fixings (alternatively, the divider can be located in a floor channel).

Fittings: Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Sacrificial hard nylon shear tip to the lock finger, which locates into flush receiver, integrated within the cubicle fascia. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Divider connected to front fascia using unique magnetic invisible fixings. Stainless steel coat hook supplied as standard.