Bobrick B38030 TimLineSeries Paper Towel Dispenser w/ Waste Receptacle & Hand Dryer Recessed - Satin


SKU: B38030 230V Bobrick

Only 100 left!

Recessed Paper Towel Dispenser, Automatic Hand Dryer, And Waste Bin (3-in-1 unit) shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Door shall be 1.2mm (18-gauge); have 14mm (9/16") 90° return edges; be secured to cabinet with concealed, full-length stainless steel piano-hinges; and equipped with a stainless steel cable door-swing limiter and two flush tumbler locks keyed like other Bobrick washroom accessories. Paper towel dispenser shall be capable of dispensing 600 multifold or 450 C-fold paper towels. Unit equipped with TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Waste bin shall be furnished with a removable, leak-proof, rigid molded plastic waste-container with a capacity of 13.7 liters (3.6 gal.). Directed air nozzles shall prevent dryer from blowing into waste bin. Hand dryer shall have a one-piece,18-8, type-304, 0.8mm (22-gauge) stainless steel cover. Dryer mounting base shall be 1.5mm (20-gauge) plated steel with three 6mm (0.236") diameter mounting holes. Fan housings shall be fire-retardant molded black plastic. Dryer shall be equipped with dual air outlets that run through two vertical ducts and out the black plastic nozzles under the towel dispenser. Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch. Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch. The dryer will be controlled by the activation sensor which is part of the electronic control. The electronic control will never allow the dryer motor to be hotter than 70°C. Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed in activation zone. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. The electronic control will have an LED that will flash green when the dryer is ready, be solid green when the dryer is running and be solid red when the dryer is not ready. Unit shall be CE marked and cUListed. Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products. Unit shall be protected by a limited 1-year warranty from date of purchase on all parts except motor brushes.


  • All-welded construction
  • Dryer has no-touch operation
  • Exposed surfaces have satin finish
  • The activation sensor mounts on a concealed panel
  • Infrared emitter receiver sensor monitors the activation zone
  • Sensor LED will turn green and flash when dryer is ready for use


Brand Bobrick
Product Type Paper Towel Dispenser w/ Waste Receptacle & Hand Dryer
Finish Satin
Paper Towel Type C-Fold/Multi-Fold
Mount Type Recessed
Bin Capacity 3.6 gal.
Dispenser Capacity 450 C-Fold/600 Multi-Fold
Manufacturer Part Number B38030 230V
Collection TrimLineSeries
Dispenser Type Manual
Material Stainless Steel
Dryer Type Automatic
Fan Type Double-Inlet Centrifugal
Voltage 208-240 V
Frequency 50/60 Hz
Amperage 3.6-4.0 Amps
Wattage 750-950 W
Horsepower 0.14 Hp
Speed 8000 RPM
Maximum Air Flow 71 CFM
Width 15.62"
Depth 3.93"
Height 57.06"
Wall Opening Width 14.25"
Wall Opening Depth 4" (minimum)
Wall Opening Height 55.56"
Certification and Listings CUListed, CE

Technical Files: