Partition mounted toilet seat cover dispenser, sanitary napkin disposal, and toilet tissue dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Toilet tissue dispenser shall be ABS plastic. Flanges shall be drawn and beveled, one-piece, seamless construction. Unit shall mount in partition and serve two toilet compartments. One side of unit shall mount flush against partition in accessible toilet compartment to allow clearance for grab bar across front of unit and installation of 18" vertical grab bar (ICC A117.1-2009). Door shall be one-piece, seamless construction; secured to cabinet with a full-length stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Self-closing disposal panels shall be secured to cabinet with spring-loaded, full-length stainless steel piano-hinges have hemmed edges and equipped with international graphic symbols identifying napkin disposal. Napkin disposal shall be furnished with a removable, leak-proof, molded polyethylene receptacle with a capacity of 0.8 gal. (3.0-L). Toilet seat cover dispenser and sanitary napkin disposal shall be serviced from one side only. Toilet seat cover dispenser shall be equipped with a plastic sight-barrier panel and hold 1000 paper covers. Unit shall be equipped with four theft-resistant, heavy-duty ABS toilet tissue spindles that hold standard-core rolls up to 5.25" (135mm) diameter (1800 sheets). Spindles shall be removable from cabinet when door is open; when door is closed, removal shall require a special key provided for the concealed locking mechanism in spindles.
- Provide optimal sanitation and hygiene in restrooms
- Stainless steel, all-welded construction
- Serves two bathroom compartments
- Unit mounts on right side of toilet (when seated) with tissue dispenser on left side
||Seat Cover Dispenser w/ Toilet Paper Dispenser & Sanitary Disposal
||1000 Covers, Two 5.25" Dia Standard Roll
|Manufacturer Part Number
||Stainless Steel, ABS Plastic
|Partition Cutout Width
|Partition Cutout Depth
||0.5" - 3.87"
|Partition Cutout Height
|Mounting Hardware Included
|Certification and Listings