ASI 0119 Mounting Box for TurboDri Hand Dryer Semi-Recessed

$167.54

SKU: 0119 American Specialties

Only 100 left!

Semi-Recessed mounting box shall reduce projection of TurboDri dryer (0197) to less than 4" (102) from wall face for ADAAG and CalDAG Barrier Free Compliance. Cover shall be fabricated of 20 gauge cold rolled steel with white porcelain enamel to match dryer or type 304 stainless steel alloy 18-8 with satin finish or bright polished finish to match optional dryer finishes. All exposed satin or bright polished surfaces shall have finish protected by PVC film easily removed after installation. Wall box shall be fabricated of 20 gauge type 304 stainless steel alloy 18-8 with matt finish. Box shall have eight (8) 0.21" diameter (Ø5.6) mounting holes provided in sides on adjustable tabs (2 per vertical side) that eliminate requirement for shim fitting for installation purposes. Three (3) 0.87" diameter (Ø22) holes shall be provided on the bottom wall and one shall be provided on each bottom sidewall to facilitate power entry location. Mounting holes shall be provided in the box rear pan to match the mounting hole pattern of the dryer unit (mounting hardware is supplied with dryer units) and holes shall have captive 0.25-20 threaded fasteners to receive dryer mounting hardware. Full-face cover shall be formed from one piece with no miters, welding or open seams on face and shall have 0.25 (6.4) square returns to wall. Cover shall be retained after closure with four (4) security pin-Torx 0.25-20 flat head screws flush with panel face and shall have black rubber vibration isolation gasket. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed spot-welded seams.

Features:

  • Unit remains integral to wall framing after installation
  • No moving or adjustable parts requiring owner access or service
  • Air intake hole pattern in cover should be kept clean on regular maintenance schedule
  • For use with 0197 TurboDri hand dryer for ADAAG and CalDAG barrier free compliance

Specifications:

Brand ASI
Product Type Mounting Box
Manufacturer Model Number 0119; 0119-92; 0119-99
Material Stainless Steel
Color/Finish White; Bright; Satin
Mount Type Semi-Recessed
Width 17"
Depth 3.56"
Height 12"
Wall Opening Width 10.75"
Wall Opening Depth 3.75" (minimum)
Wall Opening Height 16.37"

Technical Files: